2018 chevy trax rear wiper full#

Check that the knives are in the correct parking position. Leave them running before turning them off. Insert the ignition key, turn to the accessory position and operate the windscreen wipers. If necessary, repeat the process for the other wiper arm. If there is a wiper arm bracket, make sure the wiper arm rests on it. Place the wiper arm in the correct parking position on the wiper arm shaft. Use a ratchet and socket wrench to remove the nut.

Locate the LocknutĪccess the base of the wiper arms and locate the locknut on the underside of the wiper arm. Switch the ignition to accessory mode, make sure the wiper switch is off, then remove the keys. Set Ignition to Accessory Mode and Remove the Keys While resetting, it's recommended to check the level of your windshield washer fluid. Refer to the steps above for resetting the windshield wipers, ensuring they return to the correct rest position at the bottom of the windshield. Replace the plastic cover and press down until the latches click into place. You should sweep across the windshield as normal, then return to the parked position at the bottom of the windshield. Check the Windscreen WipersĬheck the function of the windscreen wipers. Reattach the wiper mechanism to the motor and replace the nut. Position the wiper blades in the correct rest position, horizontal and parallel to the windshield. Reposition the Wiper Blades to Res Position

2018 chevy trax rear wiper full#

Turn the wipers on and then off again to allow the motor to complete a full cycle and return to the correct position. Use a socket wrench to remove the nut in the center of the wiper motor. To do this, insert a screwdriver under the cover and carefully unscrew it. Remove the plastic cover that hides the motors and wiper arms. Uncover the Plastic Cover to see the wiper arms To do this, use your screwdriver to carefully unscrew it.

Remove the plastic cover that protects the windshield wiper motor and wiper arms.

‌ Winter Wiper Blades‌: Specially designed for icy and snowy conditions, the winter wiper blades have a protective cover to prevent ice build-up.īegin by opening the car's hood and locating the wiper transmission, which is typically covered by a plastic cover or cowl.

‌ Hybrid Wiper‌: Combining the properties of standard blades and cores, hybrid wipers offer optimal performance and durability.

‌ Beam Blades‌: These wipers have a sleek design and apply even pressure to the windshield for better performance.

‌ Standard Wipers‌: These are common on most vehicles and are known for their simple design and performance.

To remove the storage compartment, open it and simply pull it towards you.Knowing the different types of wipers will help you choose the right wiper for your vehicle. Remove the storage compartment to access the fuses. The internal fuse box is located under the dash on the driver's side, behind the glove compartment. Gasoline: MAF sensor Diesel: O2 sensor, exhaust gas particulate sensor Petrol: ECM PT IGN-1 / IGN-2 Diesel: ECM PT IGN-1 Turbocharger / Inlet / Outlet O2 Sensor / IMTV Solenoid Valve Diesel: Swirl Solenoid, Piston Jet Cooling Solenoid, Engine Oil Control Solenoid

Gasoline: Carbon filter purge solenoid valve / Water solenoid valve / Turbocharger pressure solenoid valve / Wastegate solenoid valve Gasoline: Ignition / Injector Coil Diesel: ECM PT IGN-2 Petrol: FAN RELAY (AUX BEC), Diesel: Fan 3 relay 85 Valve for supplying fuel vapor to the adsorber Located on the left side, near the battery. We will look at all the fuse boxes and relays of the model with a description of the circuits. The updated Chevrolet Trax appeared on the market in 2013 as a mini crossover.